Enclosed Cab, Heater, Perkins Diesel Engine, 3200kg Max Weight Capacity, 12.5M Max Lift Height, 1200mm Forks, Outriggers, 4x4 w/ 3 Way Steering, 15.5/80-24 Tires, CE certificate available from seller - CE mark on machine
Meter Reading:
5,118 Hours
Serial Number:
Location:
Pays de la Loire, France
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine
Paint
See photos for condition; Paint is dull in places
Sheet Metal (Fiberglass) Condition
See photos for condition; Inner door handle has been weld repaired.
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition; Weld repairs
General Appearance #1
Control Station
Mirrors
Cab Glass
See photos for condition; Front: Cracked
Seats/armrests
Burn holes; See photos for condition
Seat belts
Operational
Horn
Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Heavy steering wheel play; Noisy
Powertrain controls
Foot pedal sticks
Load Charts
Chart book in cab
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional
Yes
Engine Warning Lights
Operational
Travel Alarm
Operational
Gauges
Operational
Hour Meter/Odometer
5,118 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check (cs)
The main components are in place and operational.
Hour Meter/Odometer (Start)
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Injector pump
Operational
Exhaust System
See photos for condition
Radiator
Oil Leaks
Fluid Accumulation: Side of engine; See photos
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational; Fluid accumulation; Feels weak in 3rd and 4th gear.
Drive Motors
Front Axle
Front Axle Oscillating Pin Wear
Minor to moderate movement
Rear Axle
Rear Axle Oscillating Pin Wear
Minor to moderate movement
Final Drives
Limited Function Check
The drivetrain was operational.; Feels weak in 3rd and 4th gear.
Drivetrain #1
Hydraulics - Telehandler
Pumps (Hydraulics)
Valves
Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics)
Boom Lift Cylinder(s)
Minor to moderate pin and bushing movement
Telescope Boom Cylinders
Fork Tilt Cylinders
Minor to moderate pin and bushing movement
Steering Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics - Telehandler #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition (Telescopic)
Paint is dull
Boom Wear Guides
Worn thin
Carriage Back Rest
Forks
Outriggers
Dirt pads
Steering Linkage
Heavy movement
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Master Cylinder/Brake Control
Brake Control
Park Brake
Limited Function Check (Brakes)
The brake system functioned, stopping and holding the machine.
Tire Brands
Left Front: BF Goodrich; Right Front: Tractionmaster; Right Rear: Mitas; Left Rear: Tractionmaster
Tire Condition
See photos; Cuts; Gouges
Wheel Condition
Dent in front right rim.
Wheel Studs, Nuts, Lugs
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Jul 13, 2012
Silicon
5 PPM
Lead
0 PPM
Tin
1 PPM
Copper
43 PPM
Aluminum
3 PPM
Silver
N/A
Nickel
1 PPM
Chromium
1.6 PPM
Iron
55 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9.00 - 12.00; 14.00 - 18.00 hrs - please call at least 24 hours in advance
Call at least 24 hours previous the collection
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before 30 July.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
