Enclosed Cab, A/C, Heater, Komatsu Diesel Engine, 4 Speed Manual Transmission w/shuttle lever, 3100mm GP Loader Bucket, 26.5 R25 Tyres. No CE certificate available from seller - CE mark on machine.
Meter Reading:
16,682 Hours
Serial Number:
Location:
Uusimaa, Finland
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - CE mark on machine
Paint
See photos for condition; The unit has been repainted.
Sheet metal (fiberglass) condition
Minor dents; Dents; See photos for condition
Steps/Ladders
No visible damage
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Cab Glass
See photos for condition
Seats/armrests
Burn holes; Torn cover; Damaged armrest; See photos for condition
Seat belts
Operational
Horn
Operational
Control Lock Lever
Hydraulic Controls - Loader
Damaged boots
Steering Controls
Powertrain controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional
Yes
Engine Warning Lights
Operational
Travel Alarm
Missing
Gauges
Operational
Hour Meter/Odometer
16,682 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Inoperable; Controls inoperable
Limited Function Check (cs)
The main components are in place and operational.
Hour Meter/Odometer (Start)
Engine
Engine Make and Model
Komatsu ; SAA 6D engine; Serial #: 315326; 6 Cylinder Engine
Fuel Type
Diesel; Fuel Tank Cap is missing
Emission Control Label
EC & EPA certification label
Fuite des gaz au point mort (observation subjective)
Minor
Starter
Operational
Turbo or Blower
Operational
Injector pump
Operational
Układ wydechowy
No visible damage; See photos for condition
Radiador
Oil Leaks
None seen; See photos
Fuel Leaks
None seen; See photos
Cooling System Leaks
None seen; See photos
Limited Function Check
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Transmission Disconnect
Operational
Front Axle
Rear Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Front Loader: Worn; Front Loader: Braid Exposure
Loader Lift Cylinders
Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Seepage on the center cylinder; Minor to moderate pin and bushing movement
MP Bucket Cylinders
Minor to moderate pin and bushing movement
Steering Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Articulating Center Pins
Minor to visible movement
Steering Wheel Play
Minor to moderate movement
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Unable to test with slope
Limited Function Check (Brakes)
The brake system functioned, stopping and holding the machine.
The main chassis components were operational in a limited check.
Chassis #1
Specialty
Loader Bucket Condition
3100mm General purpose loader bucket
Loader Bucket Cutting Edge
See Photos
Drawbar
Scales
These will be taken off by the Customer.
Specialty #1
Oil Sample Analysis
Engine
date of analysis
Jun 19, 2012
Silicon
4 PPM
Lead
3 PPM
Tin
0 PPM
Copper
3 PPM
Aluminum
1 PPM
Silver
N/A
Nickel
0 PPM
Chromium
0.3 PPM
Iron
12 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 4pm
No
Loading Dock Available
Ramps NOT Available
Forklift NOT Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before 30 July.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
