Extended Cab, Fiat 6 cylinder, 806002 diesel engine, 5 speed transmission, Manual, 8.25 R20 Tires, 4840mm x 2230mm flat bed,**No CE certificate available from seller**
There is oil residue on the valve cover, the oil pan, the drivetrain and on the side, front and rear of the engine
Fuel Leaks
None seen
Limited Function Check
The engine started and ran during a limited check. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Functions but could not verify shifting in all ranges; Lot drive
Transmission Leaks
None Seen
Clutch
Drive Line
Lot drive
Rear Axle
1/6, 429
Limited Function Check (DT Vehicles)
The drivetrain could not be checked.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
The steering is very hard to steer and the power steering is inoperable
Steering Wheel Play
Visible slack
Brake Type
Air over hydraulic; Air Leaks; Comp belt slipping
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Inoperable
Limited Function Check (Brakes)
The service brakes performed. The park brake would not hold the machine.
Springs/Hangers Condition
Rusty
Wheel base: (Front axle to center of rear tandems)
3600mm
Front Axle Capacity
No Tag Found
Rear Axle Capacity
No Tag Found
Frame Condition
Rusty
Tire Size
8.25 R20 Tires; Brand: Yokohama
Tread Depth
12mm and 13mm Tread Depth
Wheel Condition
Rusty; Spoke Wheels
Wheel Studs
Dump Bed/Box dimensions
Flat bed, no sides: 4840mm long x 2230mm wide bed
Bed Box
Wash boarding between supports; Cracks; Weld repairs
The components that could be checked functioned with wear as noted.
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Apr 12, 2010
Silicon
7 PPM
Lead
10 PPM
Tin
1 PPM
Copper
5 PPM
Aluminum
7 PPM
Silver
N/A
Nickel
1 PPM
Chromium
2 PPM
Iron
34 PPM
Glycol
NEG
Water
NEG
Fuel
<5%
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
Location: Lombardia, Italy
Hours: 8:00am-4:00pm Mon-Fri
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Powertrain Coverage. Covers major drive train components- engine, torque hubs, transmission & front
and rear axles - and more
Available in North America. May be purchased by residents of U.S. and Mexico only, for equipment operated
within U.S., Mexico or Canada.
OEM parts and service. All repairs are made by an OEM authorized repair facility with genuine OEM replacement
parts installed by OEM trained technicians.
+353 (0)1 860 5000
