Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform as expected
NOTE: This item is offered as-is, where-is with No IronClad Assurance. IronPlanet claims no responsibility for the condition or description. This item does not include any protection offered by IronClad Assurance.
General Appearance
CE Marking and Certificate
No CE certificate available from seller - No CE mark on machine
Paint
Not original paint; Scratches; See photos for condition
Sheet Metal (Fiberglass) Condition
Dents; Surface rust; Missing panels; See photos for condition
Steps/Ladders
No visible damage
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Cab Glass
Front: Damaged weather stripping
Seats/armrests
Seat belts
Not equipped
Horn
Operational
Control Lock Lever
Hydraulic Controls
Damaged boots
Steering Controls (Crawler)
Powertrain controls
Controls stick
Oil Pressure
Warning light inoperable
Exterior Lights Functional
Yes
Engine Warning Lights
Oil pressure warnlight inoperable.
Gauges
Operational
Hour Meter/Odometer
9,192 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
General Interior Condition
Dash plastic: Worn; Flour mat missing. See photos.
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
No visible damage
Injector pump
Operational
Exhaust System
Rust penetration; Weld repair; See photos for condition
Radiator
Minor plugging of fins
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Fluid accumulation on the right cylinder; Chrome damage on the left cylinder; Chrome damage on the right cylinder; Minor to moderate pin and bushing movement
Blade Tilt Cylinders
Minor to moderate pin and bushing movement
Ripper Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition (Basic)
Rusty
Roller Frames
Rusty; Missing screws. See photos.
Belly pans
Pivot Shafts
Equalizer Bar Pivot Wear
Minor wear
Limited Function Check (Chassis)
The main components were operational when checked without a load.
Push arm/C-frame condition
Weld repair
Push Arm Trunnions
Moderate movement
Tilt/angle Linkage Pins and Bushings
Minor to moderate pin and bushing movement
Angle Linkage Pins and Bushings
Minor to moderate pin and bushing movement
Blade Trunnions/bushings
Minor to moderate pin and bushing movement
Limited Function Check (dozer)
The main components were operational in a limited check.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Grouser Height
Left Side: 30 mm; Right Side: 30 mm; Some incorrect pads fitted. See photos.
Pins and Bushings Rotated?
No
Pins and bushing wear
See photos for condition
Carrier rollers wear
See photos for condition
Track rollers wear
See photos for condition
Idlers
See photos for condition
Sprockets
See photos for condition
Undercarriage #1
Specialty
Blade Condition
Blade Cutting Edge Condition
Reversible-turned
Ripper
Specialty #1
Disputes:
As highlighted above, this item is offered As-Is, Where-Is, with no IronClad Assurance® protection. IronPlanet did not inspect this item and claims no responsibility for the condition or description. A buyer may not submit a dispute claim on this item.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:30am-4:00pm Mon-Fri
Dock and Ramps subject to max loading capacity, please check with Seller
Loading Dock Available
Ramps Available
Forklift NOT Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before 5 November.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
