Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform as expected
NOTE: This item is offered as-is, where-is with No IronClad Assurance. IronPlanet claims no responsibility for the condition or description. This item does not include any protection offered by IronClad Assurance.
Dryer/cooler for sand,machine is a shaking fluid bed dryer/cooler with 12 m2 fluidised area. This machine is suitable for a feed rate of 43,35 T/h with an initial moisture content of 8 %, the dried product rate is 40 T/h with an end moisture less than 0,3 %. The temperature of the product after cooling is < 50 °C. - The greasing points of the bearings on the dryer drive will get an extension. These bearings can be greased from one position, outside of the dryer frame. - The inspection covers
Sand Dryer & Screening System #1
M-tec batch mixer; Type ME 150 NV. See Attached Specification.
Mixing Unit #1
Storage Units #1
See Attached Plant Dimensions
During Fabrication #1
As highlighted above, this item is offered As-Is, Where-Is, with no IronClad Assurance® protection. IronPlanet did not inspect this item and claims no responsibility for the condition or description. A buyer may not submit a dispute claim on this item.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Item Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees to avoid late fees.
For this item, payment is due on or before 23 April.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.