Home Page / 2000 Haus Herr HSB 111P Crawler Mounted Blast Hole Drill
 

2000 Haus Herr HSB 111P Crawler Mounted Blast Hole Drill (#425276)

Search for other Blast Hole Drills items

Winning Bid: €9,000  
# of Bids: 1
Sold on: 29/01/14
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, Heater, Deutz Engine, Dust Collector, Rod Changer, 2 x Drill Rods, 400mm Track Shoes . ***All items located in Poland that will be exported out of the EU require an IE599 document retrieved from the Polish customs authority and submitted to IronPlanet Ltd. VAT will be applied to all transactions. On receipt of the IE599 documentation and corresponding BOLs/CMRs, VAT will be refunded to the buyer immediately***
Meter Reading: 12,235 Hours
Serial Number:
Location: Dolnoslaskie, Poland
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) Yes
Paint Not original paint; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Surface rust; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance - Drill #1
 
Control Station - Drill
Cab Glass See photos for condition
Seats/armrests Torn cover
Horn Inoperable
Hydraulic Controls Loose
Steering Controls (Crawler) Loose
Powertrain controls Controls stick
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Operational
Travel Alarm Operational
Gauges Some gauges could not be properly checked during a short operating period.; Some gauges inoperable
Hour Meter/Odometer 12,235 Hours; Inoperable hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Inoperable
Heater Inoperable
General Interior Condition
Limited Function Check (cs) The main components operated except as noted.
Control Station - Drill #1
 
Engine
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Significant
Starter Operational
Turbo or Blower No visible damage
Injector pump Operational
Exhaust System No visible damage; Rust penetration
Radiator Air cooled
Oil Leaks None seen
Fuel Leaks None seen
Limited Function Check The engine started and ran. See oil report.
Engine #1
 
Drivetrain - Drill
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Travel Speeds 2
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Track) The drivetrain was operational without a load.
Drivetrain - Drill #1
 
Hydraulics - Drill
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank Low oil level
Hoses (Hydraulics) Weathered; Steel braid exposed; Fluid accumulation
Cylinders
Cylinder Pins and Bushings Minor to moderate movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics - Drill #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition Weld repair; Weld repair on top of boom and new box section fitted
Drill Drive Head Operational
Drifter Operational
Rod Changer Bottom guide plate beside drill head is loose
Clamps/Vices Broken
Drill Steel 2 Drill rods
Dust Collection System Not operationally checked
Limited Function Check The main chassis components functioned when checked without a load.
Frame Condition (Basic) Weld repair
Roller Frames
Belly pans Missing
Pivot Shafts No visible leaks
Equalizer Bar Pivot Wear Wear consistent with hours and age
Limited Function Check (Chassis) The main components were operational when checked without a load.
Chassis #1
 
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes) 2,510Kg Overall width
Track Tensioners See photos for condition
Shoe width 400mm track shoes
Grouser Height Left Side: 16mm; Right Side: 15mm
Track link wear See photos for condition
Pins and Bushings Rotated? Rotating bushings; see photo unusual clips on pins
Pins and bushing wear See photos for condition; Some wear
Carrier rollers wear See photos for condition
Idlers See photos for condition
Sprockets See photos for condition
Undercarriage #1
Oil Sample Analysis Engine
date of analysis Jan 12, 2012
Silicon 6 PPM
Lead 1 PPM
Tin 1 PPM
Copper 4 PPM
Aluminum 2 PPM
Silver N/A
Nickel 1 PPM
Chromium 1.2 PPM
Iron 23 PPM
Glycol 0
Water 0
Fuel N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!