Home Page / 2010 Caterpillar TH414 Telehandler
 

2010 Caterpillar TH414 Telehandler (#436411)

Search for other Telehandlers items

Winning Bid: €31,775
Won using: Win It Now
 
# of Bids: 1
Sold on: 16/05/13
Auction Type: Daily Marketplace
SOLD!
Features: 3700kg Max Weight Capacity, 13.8m Max Lift Height, 1200mm Forks, 2400mm Tooth Bucket, Additional Fork Positioner Carraige w/Forks, Hook, Auxiliary Hydraulic Plumbing, Diesel, Perkins Engine, 4x4 w/ 3 Way Steering, Enclosed Cab, Heater, 15.5/80-24 Tires
Meter Reading: 4,656 Hours
Serial Number:
Location: 92000, France
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
 
General Appearance
CE Mark (on or near data plate) Yes
CE Certificate Available Yes
Paint See photos for condition
Sheet Metal (Fiberglass) Condition Right rear fender has been damaged; Right rear light cluster is bent
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance - Telehandler #1
 
Control Station - Telehandler
Mirrors
Cab Glass
Seats/armrests Damaged cushion; Aftermarket seat cover; See photos for condition
Seat belts Operational
Horn Operational
Control Lock Lever
Hydraulic Controls
Steering Controls Minimal steering wheel play
Powertrain controls
Disconnect Control
Load Charts Chart book in cab
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Operational; Service lights stay on
Travel Alarm Operational
Gauges Operational
Hour Meter/Odometer 4,656 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
General Interior Condition
Limited Function Check (cs) The main components are in place and operational.
Hour Meter/Odometer (Start)
 
Engine
Fuel Type Diesel
Emission Control Label EU and US EPA certification label
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Injector pump Operational
Exhaust System No visible damage
Radiator
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran.
Emission Control Label
 
Drivetrain - Telehandler
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Front Axle
Front Axle Oscillating Pin Wear Minor to moderate movement
Rear Axle
Rear Axle Oscillating Pin Wear Minor to moderate movement
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain - Telehandler #1
 
Hydraulics - Telehandler
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing Not operationally checked
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Telescope Boom Cylinders
Fork Tilt Cylinders Minor to moderate pin and bushing movement
Side Shift Cylinder
Carriage Tilt Cylinder Minor to moderate pin and bushing movement
Frame Leveling Cylinders Minor to moderate pin and bushing movement
Fork Positioning Cylinder (on fork carriage)
Steering Cylinders Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics - Telehandler #1
 
Chassis - Telehandler
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition (Telescopic)
Chain / Tensioners
Boom Wear Guides
Outriggers
Chassis - Telehandler #1
 
Chassis - Telehandler Basic
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Frame Condition
Limited Function Check The main chassis components functioned during a limited check.
Master Cylinder/Brake Control
Brake Control
Brake Lines/Hoses
Park Brake Held on slope
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Tire Brands (3) Eurogrip; (1) Solideal
Tire Condition See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
 
Specialty - Telehandler
Loader Bucket Condition 2,400mm Wide
Loader Bucket Cutting Edge/Shanks/Teeth (1) tooth missing
Loader Quick Coupler Manual coupler operational
Carriage Back Rest Bent
Forks 1,200mm forks; Extra side shift forks assembly
Other Hook lift
Specialty - Telehandler #1

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!