Home Page / Caterpillar 941B Crawler Loader

Caterpillar 941B Crawler Loader (#438892)

Search for other Crawler Loaders items

Winning Bid: €1,800  
# of Bids: 13   View Bid History
Sold on: 29/05/13
Auction Type: Featured Event
Features: Open Operator Station, Caterpillar 3304 Engine, Powershift, 350 mm" Track Shoes, General Purpose Bucket w/ Teeth
Meter Reading: Meter Broken
Serial Number:
Location: Abruzzo, Italy
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
General Appearance
CE Certificate Available No CE certificate available from seller - No CE mark on machine
Paint Scratches; Chips
Sheet Metal (Fiberglass) Condition Minor dents/scratches; Surface rust; Bent panels
Steps/Ladders No visible damage
Hand Rails No visible damage
General Appearance - Crawler #1
Control Station - Crawler Loader
Seats/armrests Aftermarket seat
Horn Inoperable
Control Lock Lever Loose
Hydraulic Controls - Loader
Steering Controls (Crawler)
Powertrain controls
Exterior Lights Functional No
Gauges Some gauges could not be properly checked during a short operating period.; Transmission temperature is damaged
Hour Meter/Odometer 581 Hours; Inoperable hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs) The main components operated except as noted.
Hour Meter/Odometer
Engine - Crawler
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Visible
Starter Operational
Turbo or Blower Operational
Injector pump Operational
Exhaust System Cracked; Loose; Weld repair; Oily
Oil Leaks Seepage: Side of engine; Seepage: Front of engine
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check After jump starting, the engine ran with smoke that mostly cleared. The engine would not re-start after shutting down without jump starting. The engine was difficult to start and ran rough. See oil report.
Blow by @ idle (subjective observation)
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational; Not visible
Travel Speeds 3F/3R
Steering Clutches
Steering Brakes
Final Drives
Limited Function Check (Drivetrain-Track) The drivetrain was operational without a load.
Pumps (Hydraulics) Not visually inspected
Valves Not visually inspected
Hydraulic Tank Low oil level
Hoses (Hydraulic)
Loader Lift Cylinders Minor to moderate pin and bushing movement
Bucket Tilt Cylinders Seepage on the left cylinder; Seepage on the right cylinder; Moderate movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Lift Arm Condition Plated
Tilt Linkage
Chassis to Arm Pins Moderate movement
Tilt Linkage Pins and Bushings Heavy movement
Bucket to Arms Pins Moderate movement
Limited Function Check (rt machines) The main components were operational except as noted.
Frame Condition (Basic) Cracked; Weld repair
Roller Frames
Belly pans Oily
Pivot Shafts
Limited Function Check (Chassis) The components that were checked were operational except as noted.
Chassis #1
Undercarriage - Crawler
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Tensioners See photos for condition
Grouser Height Left Side: 23 mm; Right Side: 23 mm
Track link wear See photos for condition
Pins and Bushings Rotated? No
Pins and bushing wear See photos for condition
Carrier rollers wear See photos for condition
Track rollers wear See photos for condition
Idlers See photos for condition
Sprockets See photos for condition
Pins and bushing wear
Specialty - Track Loader
Loader Bucket Condition Worn; Cracked; Weld repaired
Loader Bucket Cutting Edge Worn/damaged edge
Specialty - Track Loader #1
Oil Sample Analysis Engine
date of analysis Jan 20, 2013
Silicon 14 PPM
Lead 25 PPM
Tin 1 PPM
Copper 9 PPM
Aluminum 36 PPM
Silver N/A
Nickel 0 PPM
Chromium 1.1 PPM
Iron 100 PPM
Glycol 0
Water NEG
Fuel N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!