Home Page / 2007 Liebherr LTM1090-4.1 All Terrain Crane
 

2007 Liebherr LTM1090-4.1 All Terrain Crane (#441789)

Search for other Cranes - Mobile items

Winning Bid: €430,000
Won using: Win It Now
 
# of Bids: 1
Sold on: 30/06/13
Auction Type: Daily Marketplace
SOLD!
Features: 90 metric ton Capacity (75%) or 110 US Ton (@85%), 50 meter Boom (164') , 19 meter (62') Swingaway Jib offset to 10, 20 or 40 degrees, 7 m (23') Latice extension, Upper Air Conditioned & Heater, Tilting Cab, Anti-Two-Block, Load Moment Indicator, Auto Lube System, 20.3 metric Ton counterweight, Liebherr D934.S diesel Engine, Carrier: Enclosed Cab, A/C, Heater, Liebherr D846A7 Engine, 12 Speed Transmission, 445/95R25 (16:00 R25) Tires, 8x8x8 Drive/Steering.
Meter Reading: See Report
Serial Number:
Location: Madrid, Spain
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Safety Certification Label There is a safety certification label with a date of April,2013
Safety Certification Report Safety Certification Report Not Available - IronPlanet in no way guarantees the validity or accuracy of any safety related documents or labels associated with this item. We strongly recommend a safety inspection is performed before using this item.
Load Chart Yes
CE Mark (on or near data plate) Yes
CE Certificate Available No
Paint See photos for condition
Sheet metal (fiberglass) condition No visible damage; Missing panels at top rear
Steps/Ladders No visible damage
Hand Rails No visible damage
CE Mark (on or near data plate)
 
Drivers Cab
Mirrors No visible damage
Glass
Seats/armrests See photos for condition
Seat belts Operational
Horn Operational
Steering Controls Minimal steering wheel play
Powertrain controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Operational; Air pressure: AL3 warning light stay on
Travel Alarm Operational
Gauges Operational
Hour Meter/Odometer 2,283 Hours; 58,279 Kilometers; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
Limited Function Check (cs) The main components are in place and operational.
Hour Meter/Odometer (Start)
 
Carrier/Chassis Engine
Engine Make and Model Make: Liebherr; Model: D 846 A7; S/N: 2007 A2 0142
Fuel Type Diesel
Emission Control Label Both EPA and EC certification
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Injector pump Operational
Exhaust System No visible damage
Radiator
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Air Compressor
Limited Function Check After jump starting, the engine ran.SEE OIL REPORT.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Crane) Automatic; 12 Forward/2 Reverse speed transmission
Transmission Operational
Retarder Electric
Front Axle
Center Axle
Rear Axle
Final Drives
Limited Function Check - Carrier The drivetrain was operational without a load.
Drivetrain - Crane Carrier #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minimal movement
Steering Wheel Play Minimal movement
Brake Type Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Stopped the machine while rolling
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Air Bags Hydro-Pneumatic suspension
Frame Condition
Cross Members
Automatic Lube System Yes
Tire Size 445/95R25 tires; Axle 1; L: Bridgestone V Steel; R: Bridgestone V Steel(Remould); 2nd Axle; R: Michelin X Crane; L: Bridgestone V Steel; 3rd Axle: L: Bridgestone V Steel, R: Michelin X Crane 4th Axle: L: Bridgestone V Steel, R: Bridgestone V Steel
Tyre Condition See photos
Wheel Condition
Wheel Studs
Chassis #1
 
Hydraulics - Crane Carrier
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulic)
Limited Function Check The hydraulic system was operational without a load.
Crane Carrier/Chassis Hydraulics #1
 
Crane Operators Cab
Mirrors
Cab Glass No visible damage
Seats/armrests
Horn Operational
Safety lock out/stop
On-Board Computer Liebherr Make; LICON Model; Hardwired Computer
Anti Two Block Operational
Controls Hydraulic
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Operational
Gauges Operational
Hoist Brakes
Drum Rotation Indicator
Hour Meter/Odometer 4,044 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner The ambient temperature is too cold to check.
Heater Not operationally checked
Limited Function Check (cs) The main components are in place and operational.
Hour Meter/Odometer (Start)
 
Upper Engine
Engine Make and Model Make: Liebherr; Model: D934.S; S/N: 2006 03 8238
Fuel Type Diesel
Emission Control Label EC and EPA certification label
Block Heater No
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Injector pump Operational
Exhaust System No visible damage
Radiator
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.
Emission Control Label
 
Crane Superstructure
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Main Boom Pins Minimal movement
Main Boom Sections
Sheaves
Boom Head Section
Boom Extension Condition
Extension Chains / Cables Could not see
Wear Pads Minimal movement
Boom Length 50m Maximum boom length; 11.1m Minimum boom height; 69m Max lenght w/jib; 60.50m w/jib retracted; 7m Lattice Boom extension
Turn-table Bearing Performs within tolerance expected for age and hours
Limited Function Check (rough terrain) The main crane components functioned when checked without a load.
Outrigger Beams
Stabilizer Cylinders
Outrigger Pads
 
Crane Superstructure Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Main Hoist
Lift Cylinders Minimal pin and bushing movement
Telescope Boom Cylinders Not visible
Cylinder Pins and Bushings Minimal movement
Limited Function Check The hydraulic system was operational without a load.
Crane Superstructure Hydraulics #1
 
Specialty - Crane
Boom Extension Additional 7m Lattice section
Main Load Block Liebherr brand load block; 16t capacity load block; 17mm Diameter Rope
Overhaul Ball Name: Liebherr
Counterweight (7) x counterweights; (1) x 2.6t, (1) x 1.8t, (1) x 4.2t, (2) x 2.0t, (2) x 3.85t; Total: 20.3t
Jib 10.5 - 19m swing away jib, mountable at 10, 20 or 40 degrees
Specialty - Crane #1
 
Additional Photos
Photo #1
Oil Sample Analysis engine
date of analysis Aug 03, 2013
Silicon 6 PPM
Silver N/A
Glycol 0
Water 0
Tin 1 PPM
Aluminum 12 PPM
Chromium 2.8 PPM
Nickel 0 PPM
Copper 3 PPM
Iron 50 PPM

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!