Home Page / 1996 Akerman EC650 Track Excavator
 

1996 Akerman EC650 Track Excavator (#445576)

Search for other Excavators items

Highest bid: €12,000
Reserve not met
 
# of Bids: 1
Auction Closed on: 22/05/13
Auction Type: Daily Marketplace
RESERVE NOT MET
Features: Enclosed Cab, A/C, Heater, Volvo Engine, 2700mm Stick, 600mm Track Shoes, 2000mm Bucket, Auto-Lube System, CE certificate available from seller - No CE mark on machine
Meter Reading: Not Available
Serial Number:
Location: Madrid, Spain
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Marking and Certificate No CE certificate available from seller - No CE mark on machine
Paint Scratches; Chips; Concrete residue
Sheet Metal (Fiberglass) Condition Dents; Cracks; Surface rust; Metal corrosion; Metal erosion; Weld repairs; Bent panels
Steps/Ladders See photos for condition; bent, piece of metal on his places
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors Missing
Cab Glass No visible damage; Front: Damaged weather stripping; Left: Damaged weather stripping; Right: Damaged weather stripping; Rear: Damaged weather stripping
Seats/armrests Inoperable slide or adjustment; dirty
Seat belts Not equipped
Horn Operational; Weak
Safety lock out/stop Inoperable
Hydraulic Controls Damaged boots; Loose; Worn
Powertrain controls Loose
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional No; Some missing; Some damaged; water,cracks and dirty inside
Engine Warning Lights batteries and rpm engine lights stay on; Operational
Travel Alarm Inoperable
Gauges Inoperable gauges: hourmeter; Operational
Hour Meter (Ending) Inoperable hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Inoperable; Vents damaged
Heater Inoperable; Vents damaged
Limited Function Check (cs) The main components operated except as noted.
Hour Meter (Ending)
 
Engine
Fuel Type Diesel, fuel and dirty residue on left side on engine
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower Exhaust connection leak
Injector pump Operational; Fluid accumulation
Exhaust System Loose; Leaks at connections; Rust penetration
Radiator Minor plugging of fins; repaired
Oil Leaks See photos
Fuel Leaks See photos; Seepage: Fuel line; Dripping Leak: Fuel line; Seepage: Fuel filter; Dripping Leak: Fuel filter; Seepage: Injection pump; Dripping Leak: Injection pump; difficult to see due to the position
Cooling System Leaks None seen
Limited Function Check After jump starting the engine ran and was operational except as noted, heavy leak of fuel system, see pic
Blow by @ idle (subjective observation)
 
Drivetrain
Drive Motors Noisy; Fluid Accumulation
Final Drives
Limited Function Check The drivetrain was operational except as noted.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Fluid accumulation; Seepage; Dripping leak
Valves Fluid accumulation; Seepage; Dripping leak; seepage on right front boom check valve
Hydraulic Tank Low oil level; Seepage; on internal hoses
Hoses (Hydraulics) On machine: Loose; On machine: Worn; On machine: Seepage; On machine: Braid exposure; Boom/Stick: Loose; Boom/Stick: Worn; Boom/Stick: Braid exposure; welded
Swing Motor Seepage; Fluid accumulation
Boom Swing Cylinders
Boom Lift Cylinder(s) Seepage on the left cylinder; Heavy pin and bushing movement; drift
Stick Cylinder Seepage; Heavy pin and bushing movement; weld repaired
Bucket Cylinder Heavy pin and bushing movement; weld repaired
Limited Function Check The hydraulic system was operational except as noted.; autolube is inoperable
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition Weld repair; Plated; Minor dents on bottom of boom
Stick Condition Minor dents on inside of stick
Boom Base Pin and Bushings Excessive wear/damage
Pin and Bushings Boom to Stick Excessive wear/damage
Turn-table Bearing Heavy movement
Bottom Covers Bent
Roller Frames
Limited Function Check (Backhoe) The main components were operational with movement as indicated.; The main components were operational with damage as noted.
Chassis #1
 
Undercarriage - Crawler
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Tensioners See photos for condition
Grouser Height Left Side: 47 mm; Right Side: 49 mm
Track link wear See photos for condition
Pins and Bushings Rotated? No
Pins and bushing wear See photos for condition
Carrier rollers wear See photos for condition
Track rollers wear See photos for condition
Idlers See photos for condition
Sprockets See photos for condition
Pins and bushing wear
 
Specialty
Excavator Bucket Condition Weld repaired, welds on pin & bushins
Backhoe / Excavator Bucket Cutting Edge Worn or damaged edge
Specialty #1

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!