Home Page / 2011 Caterpillar 432E Backhoe Loader

2011 Caterpillar 432E Backhoe Loader (#448915)

Search for other Backhoe Loaders items

Winning Bid: €41,000  
# of Bids: 22
Sold on: 31/07/13
Auction Type: Featured Event
Features: Enclosed Cab, A/C, Heater, Control Pattern Changer, 70kw Caterpillar Engine, Powershift Transmission, 4x4, Extendable Stick, Front Auxiliary Hydraulics, Rear Auxiliary Hydraulics, Front Quick Coupler, 1200mm Forks, 2400mm Wide Multi-Purpose Loader Bucket, 600mm Rear Bucket
Meter Reading: 2,287 Hours
Serial Number:
Location: Emilia-Romagna, Italy
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
General Appearance
CE Mark (on or near data plate) Yes
CE Certificate Available Yes
Paint See photos for condition
Sheet Metal (Fiberglass) Condition See photos for condition
Steps/Ladders No visible damage
Hand Rails No visible damage
General Appearance - Backhoe #1
Control Station
Mirrors No visible damage
Cab Glass No visible damage
Seat belts Operational
Horn Operational
Powertrain controls
Steering Controls
Disconnect Control
Hydraulic Controls - Loader
Backhoe control configuration Pilot Controls; Equipped with a control pattern changer
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter (Ending) 2,287 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Operational
Heater Operational
General Interior Condition
Limited Function Check (cs) The main components are in place and operational.
Hour Meter (Start)
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Injector pump Operational
Exhaust System No visible damage
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran.
Blow by @ idle (subjective observation)
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Front Axle
Front Axle Oscillating Pin Wear Minor to moderate movement
Rear Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
See photos for condition
Pumps (Hydraulics) Not visually inspected
Hydraulic Tank
Hoses (Hydraulic)
Auxiliary Hydraulic Plumbing Operational; Front
Loader Lift Cylinders
Bucket Tilt Cylinders Minor to moderate pin and bushing movement
Multi Purpose Bucket Cylinders Visually ok; Hoses disconnected - Could not operate
Outrigger Cylinders (Backhoe) Minor to moderate pin and bushing movement;
Boom Swing Cylinders Minor to moderate pin and bushing movement
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Stick Cylinder
Bucket Cylinder Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minor to moderate movement
Brake Type - Backhoe Hydraulic
Master Cylinder/Brake Control
Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition
Tyre Size 340/80R18 front tires; 440/80R28 rear tires; Front: Michelin; Rear: Goodyear
Tire Condition See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Tilt Linkage
Chassis to Arm Pins Minor to moderate movement
Tilt Linkage Pins and Bushings Minor to moderate movement
Coupler to Arms Pins Minor to moderate movement
Limited Function Check (rt machines) The main chassis components were operational in a limited check.
Boom Condition
Stick Condition
Extendahoe Stick Guide
Boom Lock (Backhoe)
Swing Tower Pivot Minor to moderate movement
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick Minor to moderate movement
Pin and Bushings Stick to Bucket Minor to moderate movement
Limited Function Check (Backhoe) The main components were functional in a limited check.
Chassis #1
Loader Bucket Condition
Loader Bucket Edge
Front Quick Coupler Hydraulic front coupler; Hydraulic coupler operational
Backhoe / Excavator Bucket Condition
Backhoe / Excavator Bucket Cutting Edge Edge welded on teeth
Forks 1200mm forks
Specialty #1
Oil Sample Analysis engine hydraulic
date of analysis May 15, 2013 May 15, 2013
Silver N/A N/A
Water 0 0
Aluminum 0 PPM 0 PPM
Chromium 0 PPM 0 PPM
Nickel 0 PPM 0 PPM
Copper 0 PPM 10 PPM
Iron 4 PPM 11 PPM
Silicon 12 PPM 0 PPM
Glycol 0 0
Tin 0 PPM 0 PPM

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!