Home Page / 2012 Caterpillar 432E Backhoe Loader
 

2012 Caterpillar 432E Backhoe Loader (#450455)

Search for other Backhoe Loaders items

Winning Bid: €43,000  
# of Bids: 16   View Bid History
Sold on: 29/05/13
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, Caterpillar C4.4 Engine, 4x4, Extendable Stick, Front Quick Coupler, Rear Quick Coupler, 2400mm Wide Multi-Purpose Front Bucket, 570mm Rear Bucket, Auxillary Hydraulic Plumbing
Meter Reading: 746 Hours
Serial Number:
Location: Slaskie, Poland
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) Yes
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition No visible damage; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance - Backhoe #1
 
Control Station
Mirrors
Cab Glass No visible damage
Seats/armrests
Seat belts Operational
Horn Operational
Powertrain controls Controls stick
Steering Controls Loose
Disconnect Control
Hydraulic Controls - Loader
Backhoe control configuration Pilot Controls; Left stick (Stick and Swing) Right stick (Boom and Bucket)
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes; Some damaged
Engine Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter (Ending) 746 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
General Interior Condition
Limited Function Check (cs) The main components are in place and operational.
Hour Meter (Start)
 
Engine
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Minimal
Starter Operational
Turbo or Blower No visible damage
Injector pump Operational
Exhaust System No visible damage
Radiator Minor plugging of fins
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Front Axle
Front Axle Oscillating Pin Wear Minor to moderate movement
Rear Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulic)
Loader Lift Cylinders Minor to moderate pin and bushing movement
Bucket Tilt Cylinders Minor to moderate pin and bushing movement
Multi Purpose Bucket Cylinders Minor to moderate pin and bushing movement
Outrigger Cylinders (Backhoe) Minor to moderate pin and bushing movement
Boom Swing Cylinders Minor to moderate pin and bushing movement
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Stick Cylinder Minor to moderate pin and bushing movement
Bucket Cylinder Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Brake Type - Backhoe Hydraulic
Master Cylinder/Brake Control
Brake Control
Brake Lines/Hoses Not operationally checked
Park Brake Stopped from a slow roll
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition
Tyre Size 12.5/80-18 front tires; 16.9-28 rear tires; Front: Left: Goodyear; Front: Right: Goodyear; Rear: Right: Goodyear; Rear: Left: Goodyear
Tire Condition See photos; Cuts; Low air
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Tilt Linkage
Chassis to Arm Pins
Tilt Linkage Pins and Bushings Minor to moderate movement
Bucket to Arms Pins Minor to moderate movement
Coupler to Arms Pins Minor to moderate movement
Limited Function Check (rt machines) The main chassis components were operational in a limited check.
Boom Condition
Stick Condition
Extendahoe Stick Guide Some missing
Swing Tower Pivot Minor to moderate movement
Boom Base Pin and Bushings Minor to moderate movement
Pin and Bushings Boom to Stick Minor to moderate movement
Pin and Bushings Stick to Coupler Minor to visible movement
Outriggers Street pads
Limited Function Check (Backhoe) The main components were functional in a limited check.
Chassis #1
 
Specialty
Loader Bucket Condition
Loader Bucket Edge
Front Quick Coupler Hydraulic front coupler; Loose electric connections for front coupler
Backhoe / Excavator Bucket Condition
Backhoe / Excavator Bucket Cutting Edge
Rear Quick Coupler Manual rear coupler;
Specialty #1
Oil Sample Analysis Engine Hydraulic Transmission
date of analysis May 15, 2013 May 15, 2013 May 15, 2013
Silicon 15 PPM 2 PPM 0 PPM
Lead 0 PPM 1 PPM 0 PPM
Tin 0 PPM 0 PPM 0 PPM
Copper 53 PPM 2 PPM 5 PPM
Aluminum 0 PPM 0 PPM 0 PPM
Silver N/A N/A N/A
Nickel 0 PPM 0 PPM 0 PPM
Chromium 0 PPM 0.2 PPM 0 PPM
Iron 18 PPM 8 PPM 24 PPM
Glycol 0 N/A N/A
Water 0 NEG NEG
Fuel N/A N/A N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!