Home Page / 2010 Caterpillar 304C CR Mini Excavator

2010 Caterpillar 304C CR Mini Excavator (#450472)

Search for other Excavators items

Winning Bid: €17,500  
# of Bids: 59   View Bid History
Sold on: 29/05/13
Auction Type: Featured Event
Features: Enclosed Cab, Heater, Mitsubishi Engine, 1350mm Stick, 400mm Track Shoes, Swing Boom, Auxiliary Hydraulic Plumbing, 610mm Tooth Bucket, 1980mm Straight Blade
Meter Reading: 1,048 Hours
Serial Number:
Location: Porto, Portugal
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
General Appearance
CE Mark (on or near data plate) Yes
CE Certificate Available No
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
Control Station
Cab Glass
Seat belts Operational
Horn Operational
Safety lock out/stop
Hydraulic Controls
Powertrain controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Light on boom inoperable
Engine Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter (Ending) 1,048 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
Limited Function Check (cs) The main components are in place and operational; Machine is low on fuel.
Hour Meter (Ending)
Control Station - Wheel Excavator
Control Station - Wheel Excavator #1
Fuel Type Diesel
Emission Control Label Both EPA and EC certification
Blow by @ idle (subjective observation) Minor
Starter Operational
Injector pump Operational
Exhaust System No visible damage
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran.
Emission Control Label
Drive Motors
Final Drives
Limited Function Check The drivetrain functioned without a load.
Drivetrain #1
Pumps (Hydraulics) Operational; Not visually inspected
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing (Excavator) End of stick; Not operationally checked
Swing Motor
Hydraulic Center Swivel Operational; Not visually inspected
Boom Swing Cylinders Seepage; Minor to moderate pin and bushing movement
Boom Lift Cylinder(s) Minor movement
Stick Cylinder Minor to moderate pin and bushing movement
Bucket Cylinder Minor to moderate pin and bushing movement
Blade Lift Cylinder Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Stick Condition
Swing Tower Pivot Minor to moderate movement
Boom Base Pin and Bushings Minor to moderate movement
Pin and Bushings Boom to Stick Minor to moderate movement
Pin and Bushings Stick to Bucket Minor to moderate movement
Turn-table Bearing
Bottom Covers
Roller Frames Material build-up
Limited Function Check (Backhoe) The main components were functional in a limited check.
Chassis #1
Undercarriage - Crawler
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads See photos for condition
Track Tensioners See photos for condition
Grouser Height 10-12 mm
Track link wear See photos for condition
Pins and Bushings Rotated? No
Pins and bushing wear See photos for condition
Carrier rollers wear See photos for condition
Track rollers wear See photos for condition
Idlers See photos for condition
Sprockets See photos for condition
Pins and bushing wear
Excavator Bucket Condition Material build-up
Backhoe / Excavator Bucket Cutting Edge
Blade Condition Dented
Specialty #1
Oil Sample Analysis engine
date of analysis May 15, 2013
Silver N/A
Water 0
Aluminum 3 PPM
Chromium 0.7 PPM
Nickel 0 PPM
Copper 3 PPM
Iron 13 PPM
Silicon 7 PPM
Glycol 0
Tin 2 PPM

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!