Open Operator Station,Daihatsu Diesel Engine,10-16.5 Tires, 1560m Wide, Shop Built Tine Grapple.***All items located in Poland that will be exported out of the EU require an IE599 document retrieved from the Polish customs authority and submitted to IronPlanet Ltd. VAT will be applied to all transactions. On receipt of the IE599 documentation and corresponding BOLs/CMRs, VAT will be refunded to the buyer immediately***
After jump starting, the engine ran. Not original engine
Drivetrain - Skid Steer
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Limited Function Check
The drivetrain was operational except as noted.
Drivetrain - Skid Steer #1
Noisy; Cavitation noise;
Front Loader: Braid Exposure.
Auxiliary Hydraulic Plumbing
Wet with residue
Loader Lift Cylinders
Bucket Tilt Cylinders
Fluid accumulation on the left cylinder; Fluid accumulation on the right cylinder; Minor to moderate pin and bushing movement; pipe leaking
Limited Function Check
The hydraulic system was operational without a load.
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition (Basic)
Left Front: XTRA-WALL; Right Front: NORHAD NT.; Right Rear: NORHAD NT.; Left Rear: XTRA-WALL
Minor cuts and gouges; Gouges; Plugs; See photos
Lift Arm Condition
Chassis to Arm Pins
Minor to moderate movement
Coupler to Arms Pins
Minor to moderate movement; Weld repair; See photo
Limited Function Check (rt machines)
The main chassis components were operational in a limited check.
Specialty - Skid Steer
Loader Bucket Condition
Weld repaired; Been repaired but good condition
Loader Bucket Cutting Edge/Shanks/Teeth
Shop Built grab ,extra attached?
Specialty - Skid Steer #1
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 08.00-18.00 Mo-Fr.
Max capacity for forks 5tons, max capacity for ramps 50t
Loading Dock NOT Available
Driver MUST bring a copy of the IronPlanet Item Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before 1 July.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.