Home Page / 2006 Caterpillar 307C Mini Excavator
 

2006 Caterpillar 307C Mini Excavator (#470281)

Search for other Excavators items

Winning Bid: €19,000  
# of Bids: 29
Sold on: 30/10/13
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, Heater, Caterpillar/Mitsibishi Engine, 1700mm Stick, 450mm Track Shoes, Swing Boom, Auxiliary Hydraulic Plumbing, 950mm Tooth Bucket, 2300mm Wide Straight Blade
Meter Reading: 3,900 Hours
Serial Number:
Location: Emilia-Romagna, Italy
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) Yes
CE Certificate Available Yes
Paint Scratches; Chips
Sheet Metal (Fiberglass) Condition Cracks; Minor dents
Steps/Ladders See photos for condition
General Appearance #1
 
Control Station
Mirrors Left: loose
Cab Glass Left: Plexiglass. ; Glasses on the door replaced with plexi and cracked
Seats/armrests Torn cover; Damaged cushion
Seat belts Operational
Horn Operational
Safety lock out/stop
Hydraulic Controls Controls stick
Powertrain controls Foot pedal sticks; Controls stick
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Some inoperable; Some damaged
Engine Warning Lights Operational
Gauges Operational
Hour Meter (Ending) 3,900 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
Limited Function Check (cs) The main components are in place and operational.
Hour Meter (Start)
 
Engine
Fuel Type Diesel
Emission Control Label Both EPA and EC certification
Blow by @ idle (subjective observation) Minor
Starter Operational
Injector pump Operational
Exhaust System No visible damage
Radiator Minor plugging of fins
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check After jump starting, the engine ran.
Emission Control Label
 
Drivetrain
Drive Motors
Final Drives
Limited Function Check The drivetrain functioned without a load.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank Very low oil level
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing (Excavator) Not operationally checked; End of stick
Swing Motor
Hydraulic Center Swivel Not visually inspected
Boom Swing Cylinders Minor to moderate pin and bushing movement
Boom Lift Cylinder(s) Minor chrome damage; Heavy pin and bushing movement;
Stick Cylinder Heavy pin and bushing movement
Bucket Cylinder Heavy pin and bushing movement
Blade Lift Cylinder
Limited Function Check The hydraulic system was operational.; Some components could not be operationally checked.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Stick Condition Minor dents on inside of stick
Swing Tower Pivot Heavy movement
Boom Base Pin and Bushings Heavy movement
Pin and Bushings Boom to Stick Heavy movement
Pin and Bushings Stick to Bucket Heavy movement
Turn-table Bearing Performs within tolerance expected for age and hours
Bottom Covers Bent
Roller Frames
Limited Function Check (Backhoe) The main components were functional in a limited check.
Chassis #1
 
Undercarriage - Crawler
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads
Track Tensioners Operational
Grouser Height Left Side: 20mm; Right Side: 20mm
Track link wear
Pins and Bushings Rotated? No
Pins and bushing wear
Carrier rollers wear
Track rollers wear
Idlers
Sprockets
Undercarriage - Crawler #1
 
Specialty
Excavator Bucket Condition Worn
Backhoe / Excavator Bucket Cutting Edge Worn or damaged edge
Blade Condition
Blade Cutting Edge Condition Reversible-Not turned
Specialty #1

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!